Automatic dispensing machine dispensing efficiency is not high reasons
The pressure of the automatic dispensing machine is large, the amount of glue produced by the dispensing machine is large
Release time:
2022-07-28
Source:
Control of 1. dispensing volume
The control of the dispensing quantity of the automatic dispensing machine is very important, which directly affects the quality of the dispensing.
2. dispensing pressure control
The pressure of the automatic dispensing machine is large, the amount of glue produced by the dispensing machine is large, the pressure of the dispensing machine is small, and the amount of glue produced by the dispensing machine is small. Specific according to the actual situation (dispensing machine characteristics, indoor temperature, dispensing environment) to make adjustments.
Selection of 3. dispensing machine needle
The choice of dispensing machine pillow is also an important factor affecting the dispensing quality of automatic dispensing machine. Dexin Automation reminds everyone that the diameter of the needle of the dispensing machine should be controlled at about half the diameter of the dispensing volume.
Adjustment of 4. glue temperature
Generally speaking, the storage environment of epoxy resin glue is about 0~5 ℃, the use temperature is about 23 ℃, and it needs to be taken out of the storage room about half an hour before use, so that the glue can better adapt to the surrounding temperature and avoid the phenomenon of drawing glue during use.
Viscosity control of 5. glue
The higher the viscosity of the glue, the glue point will become smaller and even the phenomenon of wire drawing will occur. If the viscosity is too low, the glue point formed will expand and even dip-dye the pad, so it is very important to control the viscosity of the glue. Be cautious when using the glue dispenser.
6. glue can not have air intervention
Keep the glue must not have air intervention, if there is air into the glue, dispensing may appear empty, seriously affecting the actual dispensing effect.
Although the automatic dispensing machine is now very advanced automation technology, but the automatic dispensing machine, after all, is not a person, can not be satisfied with all aspects. Therefore, we must fully consider these six factors when using the dispenser for dispensing, which will greatly improve product quality and greatly improve the production efficiency of the enterprise.
Next Page
Related Information
Teying will participate in the China Semiconductor Exhibition (SemiconChina) held at the Shanghai New International Expo Center from March 20 to 22.
2020-04-23
Teying was rated as a tax-paying A- level credit enterprise.
Xiamen Teying Automation Technology Co., Ltd. was rated as a tax-paying A- level credit enterprise
2020-04-23
Warmly Congratulations on the Opening of Teying Science Park
On June 6, 2016, the three-year Teying Science and Technology Park was officially inaugurated.
2020-05-12
Service Hotline
Xiamen Headquarters: Teying Science Park, No.2 Chunfeng Road, Xiamen Torch High-tech Zone (Xiang 'an) Industrial Zone
Telephone: 865925779188
E-mail:sales@twatx.com
Service hotline:400-052-8885
Scan and follow us
Copyright©2024 Xiamen Twinwin Automation Technology Co..Ltd. Website construction:www.300.cn SEO [ Privacy Policy ]